Guyson Adds Pressure Feed to its ATEX-Certified Euroblast Ex Blast Cabinet Range
The first system, a sideloading Euroblast 10SL PF Ex, has been built to strip paint with plastic media where combustible dust is a risk.
Guyson has extended its ATEX-certified Euroblast Ex range of manual blast cabinets to include pressure feed. Previously available with suction feed only, the range now gives manufacturers who blast in the presence of potentially combustible dust a choice of feed method, so they can match the cabinet to the component, the finish required and the production rate without compromising on explosion protection.
The first pressure feed system, a Euroblast 10SL PF Ex, has been engineered for paint removal using plastic blast media – an application where both the coating being removed and the fine plastic dust produced during blasting can be combustible. Pressure feed delivers the media at a higher velocity than suction feed for faster stripping, while the cabinet’s ATEX provisions and a series of application-specific modifications keep the process safe.
“Until now, customers who needed an ATEX-certified Euroblast cabinet have been limited to suction feed,” said Mark Viner, Managing Director at Guyson. “Adding pressure feed means they no longer have to trade blasting performance for safety. This first system is a good example of how we work: a proven Euroblast platform, engineered around a demanding application, with explosion protection designed in from the start.”
Built on the Euroblast Platform
Euroblast Ex cabinets are based on Guyson’s established Euroblast range of cabinets, so they can be specified with the same wide choice of cabinet sizes and operating features. The range is certified to ATEX Directive 2014/34/EU and is designed for a Zone 21 environment inside the blast chamber and a Zone 22 environment outside it.
Inside the Euroblast 10SL PF Ex
Alongside the standard Euroblast Ex safety provisions, this installation includes several features specific to the application.
Explosion protection
Full earth bonding. The blast cabinet, cyclone and dust collector are fully earth bonded, preventing static charge from building up anywhere in the system.
Dust collector explosion venting. A burst panel and vertical vent ducting give the rapidly expanding gases from any explosion a safe, designated route out, directing them upwards and away from the system.
Specialist ducting with backflap valve. A backflap valve in the extraction ducting prevents reverse flow back through the system, adding a further layer of protection.
Handling and control
Sideloading turntable. A purpose-designed sideloading turntable makes larger and more complex components easier to load and position, so the operator can reach every surface.
Bespoke blast gun handle. A specially designed handle gives the operator greater stability and control during blasting.
Dust Collector Explosive Venting.
Specialist Ducting with Backflap Valve.
Full Earth Bonding.
Sideloading Turntable.
Bespoke Blast Gun Handle.
Where ATEX-Certified Blasting Is Needed
ATEX is the European framework governing equipment for use in potentially explosive atmospheres. In blast finishing, the hazard is combustible dust, which can come from the component, the coating being removed or the blast media itself.
The most common applications for Euroblast Ex cabinets are finishing parts made by additive manufacturing and 3D printing, where fine metal and plastic powders such as aluminium, titanium, and nylon can be combustible. Other applications arise in the aerospace, automotive, oil & gas and electronics industries – anywhere the process creates a combustible dust risk. Download the Euroblast Ex leaflet for full details of the range.
Pressure Feed or Suction Feed?
Both feed methods are now available across the Euroblast Ex range. In a pressure feed system, media is held in a pressurised vessel and driven into the air stream, giving higher blast speeds and more efficient use of air and abrasive – well suited to heavy-duty, high-output work. In a suction feed system, the blast gun draws media in by venturi effect, giving a simpler, easy-to-maintain option for medium-duty finishing. Watch how the two methods compare.
|
Blasting Speed |
Power |
Efficiency (air/abrasive) |
Application |
Maintenance |
|
|---|---|---|---|---|---|
|
Suction Feed |
Medium |
Average |
Lower |
Medium-duty finishing |
Easy to maintain |
|
Pressure Feed |
High-speed |
Heavy-duty |
Higher |
Industrial high-output |
Greater wear resistant components used |
Does Your Application Require an ATEX-Certified Shot Blasting System?
A trial at Guyson is the best way to find out what a process needs. Guyson’s free, no-obligation test and evaluation service lets manufacturers see the results on their own components before they commit, with Guyson’s test and demonstration team identifying the right cabinet size, feed method and blast media for the application.
Choosing ATEX-certified equipment is only part of the picture. In the UK, the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) require employers to assess the risks from dangerous substances, including combustible dusts, at their own workplace. Where an explosive atmosphere may occur, the employer must classify the area into zones and have its overall explosion safety verified by a competent person before it is first used. Customers should therefore obtain their own DSEAR assessment from a suitably qualified person or organisation, covering their specific application and how the equipment will be installed and used on their site. Equivalent regulations apply outside the UK.
Contact Guyson to discuss your application or arrange a trial.
FAQs
What Guyson ATEX systems are available?
Two ATEX variations of the Euroblast range of cabinets are available in a range of sizes.
The Euroblast Ex is Guyson’s standard ATEX cabinet offering, whilst the Euroblast Ex Plus comes with the additional option of a tumble basket for blasting operations.
What certification does Guyson ATEX systems have?
Guyson’s ATEX range is certified to ATEX Directive 2014/34/EU and is designed for a Zone 21 environment within the blast chamber and a Zone 22 environment externally.
Which industries benefit from a Guyson ATEX system?
The most common industry which can benefit from an ATEX system is additive manufacturing, due to the higher level of combustible materials associated with this industries applications.
However other applications can arise in the aerospace, automotive, oil & gas and electronics industries, where a combustible material risk arises.
How can I verify my process requirements?
Guyson encourage manufacturers to take advantage of our free, no-obligation test and evaluation service, data driven testing allows manufacturers to verify their correct process and equipment choice for their application.